1). A central computer that holds collections of data and programs for many PCs, workstations, and other computer is a ____________.
a) Supercomputer
b) minicomputer
c) laptop
d) server
2). To insert a copy of the clipboard contents, _____________ whatever was last cut or copied at the insertion point.
a) paste
b) stick in
c) fit in
d) push in
e) None of these
3). Which type of computers uses the 8-bit code called EBCDIC?
a) Minicomputers
b) Microcomputers
c) Mainframe computers
d) Super computer
e) None of the above
4). A special, high-speed storage area within the CPU in which all data must be represented before it can be processed is called?
a) BIOS
b) Cache
c) RAM
d) Register
e) None of these
5). To send another station a message, the main thing a user has to know is ______.
a) Whether this is a voice or data network
b) The other station’s address
c) How the network works
d) Whether the network is packet-switched or circuit-switched
e) None of these
6). The method of Internet access that requires a phone line, but offers faster access speeds than dial-up is the _______ connection
a) fibre-optic service
b) satellite access
c) cable access
d) digital subscriber line (DSL)
e) modem
7). Name the software which creates a mirror image of the entire hard disk, including the operating system, applications, files, and data?
a) Utility programs
b) Operating system
c) Backup software
d) Driver imagining
e) None of these
8). The first UNIX operating system was written in the which of the following language?
a) Assembly Language
b) C Language
c) JAVA
d) B Language
e) None of these
9). Graphical devices which are widely used to represent the graphic on screen are
a) CRT
b) Flat panel
c) Touch Screen
d) All of the above
e) None of these
10). The ATTRIB command will
a) set or remove the Read-Only, Archive, System and Hidden attributes
b) define the data files search path that DOS will use each time it fails to locate in the current directory.
c) instruct DOS to route disk drive references from one disk to another
d) All of the above
e) None of the above
11). Which among the following are the best tools for the fixing errors on disks?
a) CHKDSK
b) FIXDSK
c) FDISK
d) SCANDISK
e) None of the above
12). Which computer memory is used for storing programs and data currently being processed by the CPU?
a) Mass memory
b) Internal memory
c) Non-volatile memory
d) PROM
e) None of the above
13). In a punched card system, data is processed by a
a) Keypunch machine, sorter and posting machine
b) Accounting machine, posting machine, and billing machine
c) Sorter, posting machine, and billing machine
d) Accounting machine, keypunch machine and sorter
e) None of the above
14). CAD stands for
a) Computer aided design
b) Computer algorithm for design
c) Computer application in design
d) Computer aided for design
e) All of the above
15). Which of the following is not a feature of first generation computers
a) They used vacuum tubes or valves as main electronic component
b) They consumed lots of electricity and produced excessive heat
c) They used machine language and assembly language to program the machine
d) All of the above
e) None of above
Answers..
1 – d
2 – a
3 – c
4 – d
5 – b
6 – d
7 – d
8 – a
9 – d
10 – a
11 – d
12 – b
13 – d
14 – a
15 – c
1 – d
2 – a
3 – c
4 – d
5 – b
6 – d
7 – d
8 – a
9 – d
10 – a
11 – d
12 – b
13 – d
14 – a
15 – c
1. _________ is responsible for overall control and co-ordination of instruction execution.
(1)CPU
(2) ALU
(3) RAM
(4) Control UNIT
(5) None of these
2. ________is a high speed memory ,that can be used in between CPU and main memory
(1)CPU
(2) buffer
(3) Spooling
(4) Cache
(5) None of these
3. ________Storage capacity are frequently measured in
(1) Hz
(2) Byte
(3) MlPS
(4) bps
(5) None of these
4. (1024)3 is equivalent to-
(1) approx I million
(2) Approx 1 billion
(3) approx 10 thousand
(4) 3096
(5) None of these
5. PROM is a _________ memory i.e. the stored information remain even if power is switched off.
(1) Volatile memory
(2) Buffer memory
(3) Spooling
(4) Non-volatile
(5) None of these
6. _________ is the example of magnetic disk.
(1) Hard-disk
(2) DVD
(3) RAM
(4) Pen drive
(5) None of these
7. Format command is used to create.....
(1) Sector
(2) memory
(3) Tracks
(4) Tracks and sector
(5) None of these
8. Time required by a sector to reach below the head is known as-
(1) seek time
(2) Latency time
(3) Access time
(4) Disk time
(5) None of these
9. Disk access time is-
(1) seek time
(2) Latency time
(3) Seek time + Latency time
(4) Disk time
(5) None of these
10. A set of corresponding track in the all surface of a disk pack is known as-
(1) Surface
(2) Cylinder
(3) Track
(4) platter
(5) None of these
Answers...
1) 4
2) 4
3) 2
4) 2
5) 4
6) 1
7) 4
8) 2
9) 3
10) 4
1) 4
2) 4
3) 2
4) 2
5) 4
6) 1
7) 4
8) 2
9) 3
10) 4
#SSC #IBPS #SBI #RBI #NABARD #NICL #NIACL #CAT #NMAT #everydayquiz
No comments:
Post a Comment